2/2 way Plunger-Solenoid Valve with separating diaphragm

Last updated: 21 พ.ค. 2563 | 2452 จำนวนผู้เข้าชม |

Type 117 is a normally-closed direct-actingplunger-type solenoid valve with PTFE-coated diaphragm. The diaphragm isolates the fluidfrom the solenoid system. When deenergized (in circuit function A)the valve is closed by spring action. When energized, the solenoid armature is drawnin 2/2 way, G 1/8, UNF 1/4-28 FluidControl Systems against a spring to open the valve. The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil.

Compact design
Low electrical power consumption
Short response times
Hermetically sealing isolating diaphragm
Non-metallic valve internals

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

1. General technical data

Product characteristics
Materials
Body	ETFE (TEFZEL)
Seal	PTFE with EPDM
	PTFE with FKM
Max. viscosity	21 mm2/s
Nominal operating mode	Continuous operation (duty cycle 100 %)
Protection class with cable plug	IP65
Electrical data
Operating voltages	12 V DC, 12 V DC battery, 24 V DC, 24 V UC, 220…230 V UC
Voltage tolerance	± 10 %
Electrical connections	Standard delivery: Cable plug DIN 43 650 Form B, 0…250 V, wires 300 mm length
Performance data
Response time
Opening	Approx. 20 ms
Closing	Approx. 20 ms
Electrical power consumption	4 W
Switching frequency	Up to 300 c.p.m.
Media data
Medium
PTFE/EPDM	Alkalis, mineral acids and organic acids, washing and bleaching lyes
PTFE/FKM	Oxidising acids and lyes, saline solutions, oils and waste gases
Medium temperature	- 10 °C…+ 70 °C
Environment and installation
Max. ambient temperature	Max. + 55 °C
Installation position	Any, preferably with solenoid actuator face up