BURKERT
2509
The cable plug Type 2509 is used to connect devices and components, especially solenoid valves with plugpin assignment A according to ISO 4400.
ขายแล้ว 0 ชิ้น
SE32
Compatible with Inline sensor-fitting S030 with paddle wheel for flow measurement (see datasheets types 8032, S030)
ขายแล้ว 0 ชิ้น
3280
The direct-acting motor valve of Type 3280 is used for dosing of liquids and gases in closed or open control loops.
ขายแล้ว 0 ชิ้น
8200
The holder range for 120 mm analytical probes (pH/redox potential (ORP)/ conductivity) covers many types of applications.
ขายแล้ว 0 ชิ้น
2300
In line with Bürkert’s philosophy for modular valves and sensors the construction of Type 2300 angle-seat valve fulfils tough criteria for process environments.
ขายแล้ว 0 ชิ้น
SE35
The Type 8035 flowmeter is specially designed for use in neutral, slightly aggressive, solid free liquids.
ขายแล้ว 0 ชิ้น
2513
Plug-in connection with fixed moulded cable for connecting electrical components acc. to DIN EN 175301-803.
ขายแล้ว 0 ชิ้น
1087
Digital version with bright LED display, Analogue version with LED illumination to indicate switching status
ขายแล้ว 0 ชิ้น
5411
Type 5411 is a pilot operated 3/2-way solenoid valve with manual override as standard.
ขายแล้ว 0 ชิ้น
6519
In line with Bürkert’s philosophy the construction of the type 2301 globe valve fulfils tough criteria for process environments.
ขายแล้ว 0 ชิ้น
2301
In line with Bürkert’s philosophy the construction of the type 2301 globe valve fulfils tough criteria for process environments.
ขายแล้ว 0 ชิ้น
2012
The externally piloted globe valve consists of a pneumatically operated piston actuator and a 2/2-way valve body.
ขายแล้ว 0 ชิ้น
1605
The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders.
ขายแล้ว 0 ชิ้น
8697
The pneumatic control unit Type 8697 is designed for decentralised automation of process valves ELEMENT Type 21xx.
ขายแล้ว 0 ชิ้น
8690
The pneumatic control unit Type 8690 is designed for decentralised automation of ELEMENT Type 21xx pneumatic process valves.
ขายแล้ว 0 ชิ้น
8695
The control head Type 8695 is designed for decentralized automation of ELEMENT Type 21xx pneumatic process valves with smaller orifice.
ขายแล้ว 0 ชิ้น
8791
Compact positioner for integrated mounting on pneumatically operated process valves. Remote setpoint adjustment via a 4-20 mA signal.
ขายแล้ว 0 ชิ้น
8696
Compact positioner for integrated mounting on pneumatically operated process valves. Remote setpoint adjustment via a 4-20 mA signal.
ขายแล้ว 0 ชิ้น
8693
The compact process controller Type 8693 is optimized for integrated mounting on the pneumatic actuators in the process valve series Type 23xx/2103 and is specially designed for the requirements of a hygienic process environment.
ขายแล้ว 0 ชิ้น
8605
The digital control electronics Type 8605 are used to operate proportional solenoid control valves in a power range from 40-2000 mA....
ขายแล้ว 0 ชิ้น
6024
The direct-acting proportional valve Type 6024 works as an electromagnetically actuated control valve with relatively high flow rates at low operating pressures. The valve is normally closed...
ขายแล้ว 0 ชิ้น
2875
The direct-acting solenoid control valve Type 2875 is used as the regulating unit in control loops...
ขายแล้ว 0 ชิ้น
2871
The direct-acting solenoid control valve Type 2871 is used as the regulating unit in control loops...
ขายแล้ว 0 ชิ้น
2865
Type 2865 is an extremely compact solenoid control valve and is available with an orifice up to 4mm. It is based on the standard version of Type 2875....
ขายแล้ว 0 ชิ้น
2863
Type 2863 is an extremely compact solenoid control valve and is available with an orifice up to 4mm. It is based on the standard version of Type 2873..
ขายแล้ว 0 ชิ้น
2861
Type 2861 is an extremely compact solenoid control valve and is available with an orifice up to 2mm. It is based on the standard version of Type 2871....
ขายแล้ว 0 ชิ้น
2836
The direct-acting solenoid control valve Type 2873 is used as the regulating unit in control loops.
ขายแล้ว 0 ชิ้น
2873
The direct-acting solenoid control valve Type 2873 is used as the regulating unit in control loops.
ขายแล้ว 0 ชิ้น
8098
The Type 8098 flowmeter is part of the FLOWave product range. It is based on SAW (Surface Acoustic Waves) technology and is mainly designed for applications with the highest hygienic demands....
ขายแล้ว 0 ชิ้น
8652
The valve island Type 8652 AirLINE has been especially developed for applications in process automation. New diagnostic functions can be visualised at the LC display, both in clear text as well as symbols...
ขายแล้ว 0 ชิ้น